The EyeRide is designed to fit almost all helmets (full-face, modular, jet...).
However, as with everything, there are a few exceptions!
To help you ensure a hassle-free installation and get the most out of your EyeRide, here are the essential criteria to check.
Check that you have enough space
To install the EyeRide correctly, your helmet must have at least 2 mm of space to accommodate the top cradle.
Without this space, you will not be able to insert the EyeRide and benefit from its functions.
A customized installation
Special cases
If your helmet does not have a sun visor, check that the cap is not sewn or stuck to the inner shell.
If it is, you won't be able to slide the EyeRide in.
Then make sure you have the 2 mm space required for trouble-free installation.
Most cross helmets with visors are compatible with the EyeRide.
However, if your helmet requires you to wear a mask, installing the EyeRide may be complicated, as the prism will not fit properly behind the mask.
Helmets fitted with a front ventilation system can cause problems if the terrain is too steep.
Compatibility will depend on the specific model of your helmet, so it's a case-by-case basis.
Here are a few examples of compatible and non-compatible helmets:
- Compatible: Scorpion EXO, Dexter
- Non-compatible: Arai SZR
The EyeRide is compatible with cloth caps, but the fit may be less optimal with the 3M supplied.
To ensure better adhesion of the prism, we recommend adding a little fabric glue to the wedge.
Do you still have doubts?
Do you still have doubts about the compatibility of your motorbike helmet?
Don't worry!
You can order the EyeRide, try it out at home, and return it within 14 days of receipt if it doesn't fit. 😊